rr_immaculate
08-05 08:14 AM
Your I-94 SHOULD have the same number as the old one!
Whether they give you a new white and stamped or the printed I-797 I-94 is a moot point. The validity date and the number is what matters.
I was once given a new I-94 after visa stamping in Canada at the Derby Line border post in VT with the same I-94 # as the old (and printed I-797 I-94) for a $6 charge.
You saved $6. Go buy nice milkshakes for the family and be cool.
It is a non-issue.
Thanks for the reply.
The printed I-797 bottom left is for employee's records and the right part is the equivalent of the I-94. The officer did not put a seal with the expiry date (normally they put a seal on I-94 mentioning the visa type and expiry date) on the right part. If I am surrendering this part while leaving the country,how can they determine if I overstayed my I-94 date or not since there is no expiry date on the bottom right part.
Whether they give you a new white and stamped or the printed I-797 I-94 is a moot point. The validity date and the number is what matters.
I was once given a new I-94 after visa stamping in Canada at the Derby Line border post in VT with the same I-94 # as the old (and printed I-797 I-94) for a $6 charge.
You saved $6. Go buy nice milkshakes for the family and be cool.
It is a non-issue.
Thanks for the reply.
The printed I-797 bottom left is for employee's records and the right part is the equivalent of the I-94. The officer did not put a seal with the expiry date (normally they put a seal on I-94 mentioning the visa type and expiry date) on the right part. If I am surrendering this part while leaving the country,how can they determine if I overstayed my I-94 date or not since there is no expiry date on the bottom right part.
wallpaper This style of ankle tattoo was
pragir
07-16 04:35 PM
Has anyone and their spouse both filed for 485s while listing each other as beneficiary as well?
Is this possible?
Is this possible?
chanduv23
06-18 02:27 PM
Hi,
I came to US in 2004, my H1 visa was sponsored by cognizant technology solutions. H1 was valid from Nov 04 to Dec 06. later on my I 94 was extended from Dec 06 to July 09 .
I changed company and joined wipro in Aug 08 and now my I 94 is now valid till July 2010.
I have never gone back to India for a visit ever since I landed in US (2004)..I now want to go to India for few months and have read that i'll have to get my visa stamped before reentering US...
My question is if i'll have any problems with visa stamping because I was originally working with cognizant and am now working with wipro?..Am I out of status since my original visa expired in 2006 ?...pls help
h1 transfer is perfectly legal and you will not have any stamping issues.
I came to US in 2004, my H1 visa was sponsored by cognizant technology solutions. H1 was valid from Nov 04 to Dec 06. later on my I 94 was extended from Dec 06 to July 09 .
I changed company and joined wipro in Aug 08 and now my I 94 is now valid till July 2010.
I have never gone back to India for a visit ever since I landed in US (2004)..I now want to go to India for few months and have read that i'll have to get my visa stamped before reentering US...
My question is if i'll have any problems with visa stamping because I was originally working with cognizant and am now working with wipro?..Am I out of status since my original visa expired in 2006 ?...pls help
h1 transfer is perfectly legal and you will not have any stamping issues.
2011 blue butterfly ankle
jsb
09-13 12:57 PM
No news yet. No checks cashed. I'm getting really worried now. Anyone else with similar delivery info please post any updates on the status of your application here.
Thanx!
Yes, delivery at 10:25 and received by J BARRET at NSC. I-140 at TSC, so I assume case was transferred to TSC. Nothing heard yet. Called yesterday, was told to wait for another 30 days.
EB2-India
PD May 2004
I-140 June 2006 at TSC
Canadian Citizen for 25 years
Thanx!
Yes, delivery at 10:25 and received by J BARRET at NSC. I-140 at TSC, so I assume case was transferred to TSC. Nothing heard yet. Called yesterday, was told to wait for another 30 days.
EB2-India
PD May 2004
I-140 June 2006 at TSC
Canadian Citizen for 25 years
more...
andy garcia
09-08 07:53 PM
I filed for 485 in July without EAD and AP document since my H1B is valid for another 2 years. In a month's time the most unfortunate thing happened. The company that sponsored my H1B/Green Card just got acquired. It is anticipated that as a result several people will get laid off including me. I have yet to recieve the reciept notice for 485. What happens when something like this happens 180 days before? What are my options if I were to get laid off?
1) Get H1B transfer to another company and hope that old employer won't revoke I-140.
2) Don't get H1B transfer, don't work at all, apply for EAD and AP and wait for the next 5 months to pass. Again hope that employer doesn't revoke I-140.
I have very good relations with employer and so far I have never needed to bend any rules, but don't know what the new people will be like.
If you are on H1B status your employer has to cancel your visa once they lay you off. You need to transfer your H1 before they cancel it, otherwise you will be out of status.
1) Get H1B transfer to another company and hope that old employer won't revoke I-140.
2) Don't get H1B transfer, don't work at all, apply for EAD and AP and wait for the next 5 months to pass. Again hope that employer doesn't revoke I-140.
I have very good relations with employer and so far I have never needed to bend any rules, but don't know what the new people will be like.
If you are on H1B status your employer has to cancel your visa once they lay you off. You need to transfer your H1 before they cancel it, otherwise you will be out of status.
marlo
07-18 12:24 AM
This is totally a lawyer matter. Do not rely on any forum for this.
more...
gcnirvana
01-29 12:42 PM
Gururaj Deshpande - Founder of Sycamore N/w
Naveen Jain - Founder of InfoSpace
Naveen Jain - Founder of InfoSpace
2010 The tribal tattoo designs on
dixie
08-22 01:14 PM
Any US postgraduate degree + 3 years prior to I-140/I-485. Read the text of the bill for more details.
You mean 3 year experience in US no matter from where you got your masters degree or
Only US degree + 3 years experience will get exemption?
You mean 3 year experience in US no matter from where you got your masters degree or
Only US degree + 3 years experience will get exemption?
more...
kish006
10-31 09:03 AM
Any luck today for any body. Please post if u got ur recipt number( july 2nd filers).
hair Ankle Tattoo Designs
MatsP
January 28th, 2008, 02:51 PM
I also don't have a Nikon D40x, but I don't think any of this discussion is related to the specific camera model, although some of my discussion relies on you being able to change settings on the camera, and my names of things may be off from what Nikon uses - hopefully I can still get you on the right track.
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. The only difference is that if you want to fill the frame with a sparrow, you can sit at 10 meters or so with a 600mm, and you need to be touching the sparrow with the lens to get it to fill the fram on a 4.5mm lens. Since most of the time, we don't try to get "eye to eye" with wild sparrows and ultira-fish-eyes, nor take pictures of "everything around you" with a 600mm tele (which would put you half a mile away, or so), it appears that the wide-angle has a bigger depth of field. If you don't beleive me, feel free to place a page of newspaper print at an angle (so that you can see how much of it is in focus), and photograph the exact same bit of text from different distances with the same aperture and different focal length.
So, smaller aperture (bigger number) will allow more depth-of-field, no matter what lens you use. Wide-angle works well for indoors shots, because it's usually close-up - but I have used my 100mm Macro for some of the shots of my son.
For "active" shots, you may want to aim for f/5.6 - f/8 or so. ISO 400 or higher helps reduce the look of "flash in dark room" scenario.
For the other trick when taking action shots of kids, the trick is to use the same settings as the sports photographers: relatively short shutter speed (unless you actually want motion blur as part of the image - in the right place, it's good, in most cases not!), and use "following autofocus" (aka AF Servo or Tracking AF) - this is the part where knowing what Nikon calls it could come in handy - so that the AF is continously focusing on the subject, same as if you were trying to follow a basketball-player as he makes his way across the court to the basket. That way, the camera tries to focus (and uses "computer magic" to PREDICT where the focus should be once the shutter is triggered).
Third, I think Nikon flashes also support "Second curtain flash", which is definitely the better option for "natural looking light" - this allows the camera to capture the natural light first, the flash the flash, rather than the ohter way around. It should, in theory, make no difference, but I find that it gives a more natural look. Twiddling with the balance between flash and natural light will get you there sooner or later (usually, in my case, later - after son or daughter have finished thinking photography is fun!). The adjustments are:
- smaller aperture (bigger F-number)
- faster shutter speed
- lower ISO number.
gives more flash. Opposite gives more of the natural light.
--
Mats
--
Mats
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. The only difference is that if you want to fill the frame with a sparrow, you can sit at 10 meters or so with a 600mm, and you need to be touching the sparrow with the lens to get it to fill the fram on a 4.5mm lens. Since most of the time, we don't try to get "eye to eye" with wild sparrows and ultira-fish-eyes, nor take pictures of "everything around you" with a 600mm tele (which would put you half a mile away, or so), it appears that the wide-angle has a bigger depth of field. If you don't beleive me, feel free to place a page of newspaper print at an angle (so that you can see how much of it is in focus), and photograph the exact same bit of text from different distances with the same aperture and different focal length.
So, smaller aperture (bigger number) will allow more depth-of-field, no matter what lens you use. Wide-angle works well for indoors shots, because it's usually close-up - but I have used my 100mm Macro for some of the shots of my son.
For "active" shots, you may want to aim for f/5.6 - f/8 or so. ISO 400 or higher helps reduce the look of "flash in dark room" scenario.
For the other trick when taking action shots of kids, the trick is to use the same settings as the sports photographers: relatively short shutter speed (unless you actually want motion blur as part of the image - in the right place, it's good, in most cases not!), and use "following autofocus" (aka AF Servo or Tracking AF) - this is the part where knowing what Nikon calls it could come in handy - so that the AF is continously focusing on the subject, same as if you were trying to follow a basketball-player as he makes his way across the court to the basket. That way, the camera tries to focus (and uses "computer magic" to PREDICT where the focus should be once the shutter is triggered).
Third, I think Nikon flashes also support "Second curtain flash", which is definitely the better option for "natural looking light" - this allows the camera to capture the natural light first, the flash the flash, rather than the ohter way around. It should, in theory, make no difference, but I find that it gives a more natural look. Twiddling with the balance between flash and natural light will get you there sooner or later (usually, in my case, later - after son or daughter have finished thinking photography is fun!). The adjustments are:
- smaller aperture (bigger F-number)
- faster shutter speed
- lower ISO number.
gives more flash. Opposite gives more of the natural light.
--
Mats
--
Mats
more...
rkg000
05-12 04:47 PM
Fall1998, I am still waiting. I am a July 2007 filer. Don't worry you have company. If you are current in May, then one thing you can be sure of is that you'll be current from here on :).
hot Back Tattoos Designs for Men
immilaw
09-18 04:13 PM
If your employer has applied H1B on your bachelor degree then you are EB3 but it can change if you have BS+5yrs Experience before filing LC ..
As of now you are EB3
Correct me guys if i am wrong
H-1B is a specialty occupation requiring a B.S. degree. So H-1B will always be filed on the basis of B.S. It has nothing to do with the LC.
As of now you are EB3
Correct me guys if i am wrong
H-1B is a specialty occupation requiring a B.S. degree. So H-1B will always be filed on the basis of B.S. It has nothing to do with the LC.
more...
house matching tattoo ideas.
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
tattoo tattoo ideas for men
Since1997
08-13 11:24 AM
Couple of Jul 2nd filers got receipts - as per murthy forum members.....
more...
pictures Tribal Ankle Tattoo Design119
hibworker
09-22 03:18 PM
Starting EB2 process will be the same as EB3 process. Your company should have a position open that requires atleast Masters degree or Bachelor + 5 years experience. They'll have to go through recruitment process and document that no US citizen or PR was available to fill the position and then file PERM.
Your EB3 applicaiton will not be affected by this new application.
The whole process upto I-140 may cost $10k-15k
Your EB3 applicaiton will not be affected by this new application.
The whole process upto I-140 may cost $10k-15k
dresses Kate gosselin ankle tattoo
rtarar
02-12 07:21 AM
I am a july 2 nd filer.
No FP yet.
No FP yet.
more...
makeup Latest Rosary Tattoo Design
donsimahajan
06-20 05:46 PM
The reason why EB2 India is moving so fast is because people with 2001 PDs are stuck in BECs. Once they come to apply for I-140/I-485, EB2 India PD will retrogress to 2001 again. So the progress you are watching is an illusion.
That's a good point. It will be terrible to see the dates retrogress again. There's no end to this.
Donsi
That's a good point. It will be terrible to see the dates retrogress again. There's no end to this.
Donsi
girlfriend Ankle tattoo designs on happy
kartikiran
10-05 03:48 PM
Administrators, I am sure the question from "bluekayal" was an innocent one.
Honestly, I believe in IV as an organization which does not differentiate race, gender, country, category etc.
I am well aware that there are lot of ladies who are well represented in IV Core and its initiatives. I understand very well, how much they contribute when they volunteer for IV activities, especially after everything that a woman does with juggling time between family and work.
Also I am sure others will understand that there are more advisors who are not men, but they probably would not have agreed to present themselves yet, publicly as part of the board for ImmigrationVoice.
Again, hats off to all your efforts & no need to remove the hats to scratch your head...;)
Thanks bluekayal, we appreciate your comments. At this time we can just share with you that IV works with many more advisers and this is a partial list, based on the formalities and complexities of public announcement.
IV does not make judgment based on any denomination that divides us as humans. Frankly, we are scratching our head with your comments.
Honestly, I believe in IV as an organization which does not differentiate race, gender, country, category etc.
I am well aware that there are lot of ladies who are well represented in IV Core and its initiatives. I understand very well, how much they contribute when they volunteer for IV activities, especially after everything that a woman does with juggling time between family and work.
Also I am sure others will understand that there are more advisors who are not men, but they probably would not have agreed to present themselves yet, publicly as part of the board for ImmigrationVoice.
Again, hats off to all your efforts & no need to remove the hats to scratch your head...;)
Thanks bluekayal, we appreciate your comments. At this time we can just share with you that IV works with many more advisers and this is a partial list, based on the formalities and complexities of public announcement.
IV does not make judgment based on any denomination that divides us as humans. Frankly, we are scratching our head with your comments.
hairstyles Best Ankle Tattoo Designs For
SDdesi
06-02 09:15 PM
This is a disaster for all FDBL clients. Wonder how this will affect people who have a I140 approved and 485 pending?
ram006
07-17 09:35 AM
I meant re-apply for her 485
I have to apply for my wife as my derivative of 485. My 485 was approved on July 8th 2010. Below is the timeline
July 1st - Applied Wife's 485
July 8th - My 485 was approved
July 13th - Wife's 485 Denied due to outdated forms
July 14th - My H1, Wife's H4 and I-94 Expired
July 19th - Planning on sending a new 485 application for spouse
I'm mainly concerned about two things
1. Is she out of status for 5 days from July 14th to 19th
2. Can I still apply her as a derivative, as my 485 is already approved.
Thank you,
I have to apply for my wife as my derivative of 485. My 485 was approved on July 8th 2010. Below is the timeline
July 1st - Applied Wife's 485
July 8th - My 485 was approved
July 13th - Wife's 485 Denied due to outdated forms
July 14th - My H1, Wife's H4 and I-94 Expired
July 19th - Planning on sending a new 485 application for spouse
I'm mainly concerned about two things
1. Is she out of status for 5 days from July 14th to 19th
2. Can I still apply her as a derivative, as my 485 is already approved.
Thank you,
amitga
02-11 03:19 PM
Link not working for me
